Disposable virus sampling tube

Disposable virus sampling tube Disposable virus sampling tube
Disposable virus sampling tube Disposable virus sampling tube
Disposable virus sampling tube Disposable virus sampling tube
Disposable virus sampling tube
Contact:BIO
Tel:+86-0577-86727208
Mobile:13185888551
Email:898758954@qq.com
产品名称
Product(s)
规格型号
Model

一次性使用病毒采样管

(Disposable Virus
SamplingTube)
一次性使用病毒采样管-A 灭活
型,非无菌提供
Disposable virus sampling tube-a
inactivated type, not provided  aseptically
一次性使用采样管-B 非灭活
型,非无菌提供
Disposable sampling tube-Bis
non inactivated and non sterile


INTENDED USE
It is used for the collection and transportation of clinical influenza, avian influenza, hand, foot and mouth disease, measles and other virus specimens, as well as chlamydia, mycoplasma and ureaplasma specimens.


PACKING SPECIFICATION  
50Testing / box & 800 Testing / box


MAIN COMPONENTS

Number

Composition

50 Testing/box

800 Testing/box

1

Sampling Tube (with 3ml non-inactivated solution)

3ml ×50 tube


3ml × 800 tube

2

Nasal Swab

50 pcs/box

800 pcs/box

3

Throat Swab

50 pcs/box

800 pcs/box

4

Instructions

1 serving

1 serving

STORAGE CONDITIONS

Store at  temperature 0- 40 ℃.



SAMPLE REQUIREMENTS

1. Applicable sample types: Pharyngeal swabs, nasopharyngeal swabs, saliva, sputum and other clinical samples.
2. Storage and transportation of samples: After the sample is collected, it should be transported to the corresponding laboratory for testing within 48 hours, and the storage temperature is 2-8℃. If it cannot be transported to the laboratory within 48 hours, it should be stored at -20℃ or below and sent to the corresponding laboratory within one week. The sample should avoid repeated freezing and thawing.


INSTRUCTIONS

202011171538089124_01.jpg

202011171538089124_03.jpg

202011171538089124_05.jpg

202011171538089124_07.jpg

202011171538089124_09.jpg

Open the packageCollect the sample as requiredAfter collecting the sample, place the swab in the sampling solutionBreak the handle at the break point of the swab and leave the swab head in the tubeTighten the cap and mark the sample information on the tube label

1. Mark the  sample information on the tube.
2. According to different sampling requirements, use a sampling swab to sample at the corresponding part, hold the handle to gently insert the sampling swab into the sampling site, gently rotate the sampling swab 3-5 times, and then slowly take it out.
3. Put the  sample into the sampling tube, break the swab at the breaking point of the swab, and leave the swab head in the tube, then tighten the tube cap to complete the sampling.
4. Freshly collected clinical specimens should be transported to the laboratory within 48 hours at 4 ° C. Those that cannot be sent to the laboratory within 48 hours should be stored at -20 ° C or below.
5. The conventional sampling methods are as follows:
a) Nasal swab: Insert the head of the swab gently into the nasopalatine part of the nasal canal, stop for a while, and then slowly rotate it out. In the same way, swab the other nostril with another swab, immerse the head of the swab into the sampling solution, and discard the tail.
b) Pharyngeal swab: Use a swab to wipe the bilateral pharyngeal tonsils and posterior pharyngeal wall. Immerse the swab head in the sample solution and discard the tail.
c) Mouthwash: Gargle the mouth with 10ml normal saline, let the patient's head tilt back slightly, make an "Oh" sound, let the saline rotate in the pharynx, and collect the wash with an empty 50ml sterilized  tube.
d) Nasal wash: The patient takes a sitting position, tilts her head slightly back, injects 50 ml of normal saline into one nostril with a pipette, and instructs the patient to simultaneously sound “K” to close the pharyngeal cavity. Then let the patient bow his head to let the saline flow out, collect the liquid with an empty 50 ml sterilized tube, and repeat this process to wash the other nostrils.
e) Nasopharyngeal extract: Tracheal and bronchial secretions are often collected using this method, and a mucus is drawn from the nasopharynx with a collector connected to a negative pressure pump. First insert the collector head into the nasal cavity, turn on the negative pressure, rotate the collector head and slowly push it out. Collect and draw the mucus, and rinse the collector three times with 5 ml of the sampling solution.
f) Autopsy tissue specimens: Collect autopsy tissue specimens if necessary to separate sample components. The specimen is autopsy tissue.
g) Samples of mycoplasma, chlamydia, ureaplasma: for the male, inserts the sterilized swab into the urethra about 2cm, rotated, and took the material at rest for several seconds , for the female, wipes out the cervical mucus and inserts the sterilized swab into the cervical tube for 1-2cm to take the material.


PRECAUTIONS

1. Samplers should be sent for testing as soon as possible after sampling, and immediately be transported at a low temperature of 4℃. The collected samples can be stored at  2-8℃ for a short period of 48 hours, long-term storage should be placed in low temperature conditions below -20℃, -70℃ or store at -196℃.
2. This product is strictly prohibited for the sampling of bacterial samples. The antibiotics contained in the preservation solution itself have an inhibitory effect on bacteria.
3. It is forbidden to directly touch  patients, or to sample with wet swab.
4. Sampling should be carried out in strict accordance with the sampling procedure, so that the sampling location is accurate and the sampling strength is uniform and suitable, otherwise it will affect the quality of samples.
5.Do not use expired products and products with damaged packaging.

未标题-8.jpg未标题-7.jpg

 






© 2020 Wenzhou Astock Biology Technology Co.,Ltd. Powered By:Injnet